全部
▼
熱搜：
2365 主要特點Main features:
Open type vertical heating furnace,tube and flange can pivot and move away from chamber.
開啟式立式加熱體，爐管法蘭可繞軸旋轉移出爐腔。
With standard configuration of OD100mm quartz tube and 40T electrical press
標配Φ100mm石英管真空密封，40T電動壓力機。
Adopt graphite push rod and mould,at the same time of pressing,heat the powder to common sintering temperature or lower,to get the dender and uniform product after a short time
采用石墨頂桿和石墨模具，在加壓的同時使粉末加熱到正常燒結溫度或更低一些，經過較短時間燒結成致密而均勻的制品。
技術參數Technical Parameters
Power
輸入電源
Power rated: 3KW
額定功率：3KW
Voltage
電壓
Voltage rated: AC220V 50/60HZ
額定電壓： AC220V 50/60HZ
Working Temperature
工作溫度
Max. Temperature: 1200℃ ( 1 hr)
最高溫度：1200℃ (1小時)
Continuous working temperature: ≤1150℃
持續工作溫度：≤1150℃
Max. heating Rate: ≤10℃/min
最快升溫速率：≤10℃/分
Temperature Controller
控溫方式
PID automatic control and auto-tune function.
模糊PID控制和自整定調節
30 programmable segments for precise thermal processing.
智能化30段可編程控制
Built-in protection for the over-heated and broken thermocouple.
超溫和斷偶報警功能
Heating Elements
加熱元件
Resistance wire, Fe-Cr-Al Alloy doped by Mo
電阻絲（摻鉬鐵鉻鋁合金）
Temperature Accuracy
控溫精度
+/- 1℃
Prosessing tube
爐管
Φ100*460mm
Graphite rod diameter
石墨壓桿直徑
87mm
Pressure maintain time
保壓時間
0-50min
Movable distance
壓力行程
50mm
Plunger diameter
活塞直徑
87mm
Pressure stability
壓力穩定性
≤1MPa/5min
Weight
重量
400kg
Vacuum Flange
真空法蘭
Special designed flanges
定制法蘭
Vacuum Pressure
真空壓力
1pa can be achieved by mechanical pump
機械泵可達1pa
10^-4 pa can be reached by molecular pump
分子泵可達10^-4pa
Please click the picture below to order vacuum parts
點擊下列圖片訂購真空部件
Warranty
質保
One year limited warranty with lifetime support (Such consumable parts as tO-rings, etc. are NOT supported by the warranty)
一年質保終身支持（消耗品如O型圈等不在質保范圍內）
Warning
注意事項
Graphite must used under anaerobic condition
石墨必須絕氧使用
Considering contact area calculate pressure
計算壓強時應考慮接觸面積
Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。
Compliance
認證
CE Certified
CE認證
The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost.
可付費進行TUV(UL61010)或CSA認證
分享 0
舉報 0
收藏 0
反對 0
點贊 0
湖北 - 武漢
2025年07月23日 ~ 26日
